1 and 2-port IEEE 802.11a/b/g/n wireless Modbus/DNP3 gateways
Features and Benefits
- Supports Modbus serial tunneling communications through an 802.11 network
- Supports DNP3 serial tunneling communications through an 802.11 network
- Accessed by up to 16 Modbus/DNP3 TCP masters/clients
- Connects up to 31 or 62 Modbus/DNP3 serial slaves
- Embedded traffic monitoring/diagnostic information for easy troubleshooting
- microSD card for configuration backup/duplication and event logs
- Serial port with 2 kV isolation protection
- -40 to 75°C wide operating temperature models available
- Supports 2 digital inputs and 2 digital outputs
- Supports redundant dual DC power inputs and 1 relay output
- Security features based on IEC 62443
Introduction
The MGate W5108/W5208 gateways are an ideal choice for connecting Modbus serial devices to a wireless LAN, or DNP3 serial to DNP3 IP through a wireless LAN. With IEEE 802.11a/b/g/n support, you can use fewer cables in difficult wiring environments, and for secure data transmission, the MGate W5108/W5208 gateways support WEP/WPA/WPA2. The gateways’ rugged design makes them suitable for industrial applications, including oil and gas, power, process automation, and factory automation.
10/100BaseT(X) Ports (RJ45 connector)
1
Magnetic Isolation Protection
1.5 kV (built-in)
Industrial Protocols
DNP3 TCP Master, DNP3 TCP Outstation (Slave), Modbus TCP Client (Master), Modbus TCP Server (Slave)
Configuration Options
Web Console (HTTP/HTTPS), Device Search Utility (DSU), Telnet Console
Management
ARP, DHCP Client, DNS, HTTP, HTTPS, SMTP, SNMP Trap, SNMPv1/v2c/v3, TCP/IP, Telnet, SSH, UDP, NTP Client
MIB
RFC1213, RFC1317
Time Management
NTP Client
No. of Ports
MGate W5108 Series: 1
MGate W5208 Series: 2Connector
DB9 male
Serial Standards
RS-232/422/485 (software selectable)
Baudrate
50 bps to 921.6 kbps
Data Bits
7, 8
Parity
None, Even, Odd, Space, Mark
Stop Bits
1, 2
Flow Control
RTS Toggle (RS-232 only), RTS/CTS, XON/XOFF
Pull High/Low Resistor for RS-485
1 kilo-ohm, 150 kilo-ohms
Terminator for RS-485
120 ohms
Isolation
2 kV
RS-232
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422
Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w
Data+, Data-, GND
RS-485-4w
Tx+, Tx-, Rx+, Rx-, GND
Industrial Protocols
Modbus RTU/ASCII Master, Modbus RTU/ASCII Slave, DNP3 Serial Master, DNP3 Serial Outstation (Slave)
Frequency Band for EU (20 MHz operating channels)
2.412 to 2.472 GHz (13 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels)
5.500 to 5.700 GHz (11 channels)Frequency Band for JP (20 MHz operating channels)
2.412 to 2.484 GHz (14 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels)
5.500 to 5.700 GHz (11 channels)Frequency Band for US (20 MHz operating channels)
2.412 to 2.462 GHz (11 channels)
5.810 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels)
5.500 to 5.700 GHz (8 channels)
5.745 to 5.825 GHz (5 channels)Receiver Sensitivity for 802.11a
-91 dBm @ 6 Mbps
-90 dBm @ 9 Mbps
-88 dBm @ 12 Mbps
-86 dBm @ 18 Mbps
-82 dBm @ 24 Mbps
-81 dBm @ 36 Mbps
-75 dBm @ 48 Mbps
-74 dBm @ 54 MbpsReceiver Sensitivity for 802.11b
-92 dBm @ 1 Mbps
-88 dBm @ 2 Mbps
-87 dBm @ 5.5 Mbps
-84 dBm @ 11 Mbps
MGate W5108/W5208 Series
- Brand: MOXA
- Product Code: MGate W5108/W5208 Series
- Availability: Please email - info@cayee.com.hk