• MGate 5105-MB-EIP Series

1-port MQTT-supported Modbus RTU/ASCII/TCP-to-EtherNet/IP gateways

Features and Benefits

  •  Connects fieldbus data to cloud through generic MQTT
  •  Supports MQTT connection with built-in device SDKs to Azure/Alibaba Cloud
  •  Protocol conversion between Modbus and EtherNet/IP
  •  Supports EtherNet/IP Scanner/Adapter
  •  Supports Modbus RTU/ASCII/TCP master/client and slave/server
  •  Supports MQTT connection with TLS and certificate in JSON and Raw data format
  •  Embedded traffic monitoring/diagnostic information for easy troubleshooting and cloud data transmission for cost evaluation and analysis
  •  microSD card for configuration backup/duplication and event logs, and data buffering when cloud connection is lost
  •  -40 to 75°C wide operating temperature models available
  •  Serial port with 2 kV isolation protection
  •  Security features based on IEC 62443

    Introduction

    The MGate 5105-MB-EIP is an industrial Ethernet gateway for Modbus RTU/ASCII/TCP and EtherNet/IP network communications with IIoT applications, based on MQTT or third-party cloud services, such as Azure and Alibaba Cloud. To integrate existing Modbus devices onto an EtherNet/IP network, use the MGate 5105-MB-EIP as a Modbus master or slave to collect data and exchange data with EtherNet/IP devices. The latest exchange data will be stored in the gateway as well. The gateway converts stored Modbus data into EtherNet/IP packets so the EtherNet/IP scanner can control or monitor Modbus devices. The MQTT standard with supported cloud solutions on the MGate 5105-MB-EIP leverages advanced security, configuration, and diagnostics to troubleshoot technologies to deliver scalable and extensible solutions that are suitable for remote monitoring applications such as energy management and assets management.

    • 10/100BaseT(X) Ports (RJ45 connector)

       

      2
      Auto MDI/MDI-X connection

    • Magnetic Isolation Protection

       

      1.5 kV (built-in)

    • Industrial Protocols

       

      Modbus TCP Client (Master), Modbus TCP Server (Slave), EtherNet/IP Scanner, EtherNet/IP Adapter, MQTT

    • Configuration Options

       

      Web Console (HTTP/HTTPS), Device Search Utility (DSU), MGate Manager, Telnet Console

    • Management

       

      ARP, DHCP Client, DNS, HTTP, HTTPS, SMTP, SNMP Trap, SNMPv1/v2c/v3, TCP/IP, Telnet, SSH, UDP, NTP Client

    • MIB

       

      RFC1213, RFC1317

    • Time Management

       

      NTP Client

    • Console Port

       

      RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1)

    • No. of Ports

       

      1

    • Connector

       

      DB9 male

    • Serial Standards

       

      RS-232/422/485

    • Baudrate

       

      50 bps to 921.6 kbps

    • Data Bits

       

      7, 8

    • Parity

       

      None, Even, Odd, Space, Mark

    • Stop Bits

       

      1, 2

    • Flow Control

       

      RTS Toggle (RS-232 only), RTS/CTS

    • RS-485 Data Direction Control

       

      ADDC® (automatic data direction control)

    • Pull High/Low Resistor for RS-485

       

      1 kilo-ohm, 150 kilo-ohms

    • Terminator for RS-485

       

      120 ohms

    • Isolation

       

      2 kV (built-in)

    • RS-232

       

      TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

    • RS-422

       

      Tx+, Tx-, Rx+, Rx-, GND

    • RS-485-2w

       

      Data+, Data-, GND

    • RS-485-4w

       

      Tx+, Tx-, Rx+, Rx-, GND

    • Configuration Options

       

      Serial Console

    • Industrial Protocols

       

      Modbus RTU/ASCII Master, Modbus RTU/ASCII Slave

    • Mode

       

      Master, Slave

    • Functions Supported

       

      1, 2, 3, 4, 5, 6, 15, 16, 23

MGate 5105-MB-EIP Series

  • Brand: MOXA
  • Product Code: MGate 5105-MB-EIP Series
  • Availability: Please email - info@cayee.com.hk