• NPort 5600-DTL Series

8-port entry-level RS-232/422/485 serial device servers

Features and Benefits

  •  8 serial ports supporting RS-232/422/485
  •  Compact desktop design
  •  10/100M auto-sensing Ethernet
  •  Configure by Telnet, web browser, or Windows utility
  •  Supports Real COM and TCP server, TCP client, UDP socket modes
  •  SNMP MIB-II for network management

    Introduction

    NPort® 5600-8-DTL device servers can conveniently and transparently connect 8 serial devices to an Ethernet network, allowing you to network your existing serial devices with basic configurations. You can both centralize management of your serial devices and distribute management hosts over the network. The NPort® 5600-8-DTL device servers have a smaller form factor than our 19-inch models, making them a great choice for applications that need additional serial ports when mounting rails are not available.

    • 10/100BaseT(X) Ports (RJ45 connector)

       

      1

    • Magnetic Isolation Protection

       

      1.5 kV (built-in)

    • Configuration Options

       

      Serial Console, Telnet Console, Web Console (HTTP/HTTPS), Windows Utility

    • Management

       

      ARP, BOOTP, DHCP Client, DNS, HTTP, HTTPS, ICMP, IPv4, LLDP, Rtelnet, SMTP, SNMPv1/v2c, Telnet, TCP/IP, UDP

    • Filter

       

      IGMP v1/v2

    • Windows Real COM Drivers

       

      Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded

    • Linux Real TTY Drivers

       

      Kernel versions: 2.4.x, 2.6.x, 3.x, 4.x, and 5.x

    • Fixed TTY Drivers

       

      SCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6.x, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X

    • Android API

       

      Android 3.1.x and later

    • MIB

       

      RFC1213, RFC1317

    • Time Management

       

      SNTP

    • Connector

       

      DB9 male

    • No. of Ports

       

      8

    • Serial Standards

       

      NPort 5610-8-DTL Series: RS-232
      NPort 5650-8-DTL Series: RS-232, RS-422, RS-485

    • Baudrate

       

      Supports standard baudrates (unit=bps): 50, 75, 110, 134, 150, 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 19200, 38400, 57600, 115200, 230.4k, 460.8k, 921.6k

    • Data Bits

       

      5, 6, 7, 8

    • Stop Bits

       

      1, 1.5, 2

    • Parity

       

      None, Even, Odd, Space, Mark

    • Flow Control

       

      RTS/CTS, DTR/DSR, XON/XOFF

    • Isolation

       

      NPort 5650I-8-DTL Series: 2 kV

    • Pull High/Low Resistor for RS-485

       

      1 kilo-ohm, 150 kilo-ohms

    • RS-485 Data Direction Control

       

      ADDC® (automatic data direction control)

    • Terminator for RS-485

       

      NPort 5650 Series: 120 ohms

    • RS-232

       

      TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

    • RS-422

       

      Tx+, Tx-, Rx+, Rx-, GND

    • RS-485-4w

       

      Tx+, Tx-, Rx+, Rx-, GND

    • RS-485-2w

       

      Data+, Data-, GND

    • Input Current

       

      NPort 5610-8-DTL Series: 340 mA @ 12 VDC
      NPort 5650-8-DTL Series: 470 mA @ 12 VDC
      NPort 5650I-8-DTL Series: 740 mA @ 12 VDC

    • No. of Power Inputs

       

      1

    • Input Voltage

       

      12 to 48 VDC

    • Reverse Polarity Protection

       

      Supported

    • Source of Input Power

       

      Power input jack

    NPort 5600-DTL Series

    • Product Code: NPort 5600-DTL Series
    • Availability: Please email - info@cayee.com.hk