• CN2600 Series

8 and 16-port RS-232/422/485 terminal servers with dual-LAN redundancy

Features and Benefits

  •  LCD panel for easy IP address configuration (excluding wide-temperature range models)
  •  Dual-LAN cards with two independent MAC addresses and IP addresses
  •  Redundant COM function available when both LANs are active
  •  Dual-host redundancy can be used to add a backup PC to your system
  •  Dual-AC-power inputs (for AC models only)
  •  Real COM/TTY drivers for Windows and Linux
  •  Universal high-voltage range: 100 to 240 VAC or 88 to 300 VDC

    Introduction

    Redundancy is an important issue for industrial networks, and various types of solutions have been developed to provide alternative network paths when equipment or software failures occur. “Watchdog” hardware is installed to utilize redundant hardware, and a “Token”- switching software mechanism is applied. The CN2600 terminal server uses its built-in Dual-LAN ports to implement a “Redundant COM” mode that keeps your applications running uninterrupted.

    • 10/100BaseT(X) Ports (RJ45 connector)

       

      2

    • Magnetic Isolation Protection

       

      1.5 kV (built-in)

    • Configuration Options

       

      CN2610-8/CN2610-16: Serial Console, Telnet Console, Windows Utility, Device Search Utility (DSU)
      CN2650-8/CN2650-16/CN2600-2AC models: Serial Console, Telnet Console, Windows Utility, Device Search Utility (DSU), Web console (HTTP/HTTPS)

    • Management

       

      ARP, BOOTP, DDNS, DHCP Client, DNS, HTTP, IPv4, SMTP, SNMPv1/v2c/v3, TCP/IP, Telnet, UDP, ICMP, SLIP

    • MIB

       

      MIB-II

    • Security

       

      HTTPS/SSL, RADIUS, SSH, PAP, CHAP

    • Unicast Routing

       

      RIPV1/V2, Static Route

    • Windows Real COM Drivers

       

      Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2/2016/2019 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded

    • Linux Real TTY Drivers

       

      Kernel versions: 2.4.x, 2.6.x, 3.x, 4.x, and 5.x

    • Fixed TTY Drivers

       

      SCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X

    • Android API

       

      Android 3.1.x and later

    • Connector

       

      CN2610/CN2650 models: 8-pin RJ45
      CN2650I models: DB9 male

    • No. of Ports

       

      CN2600-8 models: 8
      CN2600-16 models: 16

    • Serial Standards

       

      CN2610 models: RS-232
      CN2650 models: RS-232/422/485

    • Operation Modes

       

      Real COM mode, TCP Server mode, TCP Client mode, UDP mode, RFC2217 mode, Terminal mode, Reverse Telnet mode, PPP mode, DRDAS mode, Redundant COM mode, Disabled

    • Baudrate

       

      50 bps to 921.6 kbps

    • Data Bits

       

      5, 6, 7, 8

    • Stop Bits

       

      1, 1.5, 2

    • Parity

       

      None, Even, Odd, Space, Mark

    • Flow Control

       

      None, RTS/CTS, DTR/DSR, XON/XOFF

    • Isolation

       

      CN2650I models: 2 kV

    • RS-485 Data Direction Control

       

      ADDC® (automatic data direction control)

    • Pull High/Low Resistor for RS-485

       

      1 kilo-ohm, 150 kilo-ohms

    • Terminator for RS-485

       

      120 ohms

    • Console Port

       

      RS-232 (TxD, RxD, GND), 8-pin RJ45 (19200, n, 8, 1)

    • RS-232

       

      TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

    • RS-422

       

      Tx+, Tx-, Rx+, Rx-, GND

    • RS-485-4w

       

      Tx+, Tx-, Rx+, Rx-, GND

    • RS-485-2w

       

      Data+, Data-, GND

    • No. of Power Inputs

       

      -2AC models: 2
      All other models: 1

    • Input Current

       

      -HV models: 200 mA @ 88 VDC
      All other models: 130 mA @ 110 VAC

    • Input Voltage

       

      -HV models: 110 VDC (88 to 300 VDC)
      All other models: 100 to 240 VAC, 47 to 63 Hz

CN2600 Series

  • Brand: MOXA
  • Product Code: CN2600 Series
  • Availability: Please email - info@cayee.com.hk