• ICF-1150 Series

Industrial RS-232/422/485 to fiber converters

Features and Benefits

  •  3-way communication: RS-232, RS-422/485, and fiber
  •  Rotary switch to change the pull high/low resistor value
  •  Extends RS-232/422/485 transmission up to 40 km with single-mode or 5 km with multi-mode
  •  -40 to 85°C wide-temperature range models available
  •  C1D2, ATEX, and IECEx certified for harsh industrial environments

    Introduction

    The ICF-1150 serial-to-fiber converters transfer RS-232/RS-422/RS-485 signals to optical fiber ports to enhance transmission distance. When an ICF-1150 device receives data from any serial port, it sends the data through the optical fiber ports. These products not only support single-mode and multi-mode fiber for different transmission distances, models with isolation protection are also available to enhance noise immunity. The ICF-1150 products feature Three-Way Communication and a Rotary Switch for setting the pull high/low resistor for onsite installation.

    • No. of Ports

       

      2

    • Serial Standards

       

      RS-232, RS-422, RS-485

    • Baudrate

       

      50 bps to 921.6 kbps (supports non-standard baudrates)

    • Flow Control

       

      ADDC® (automatic data direction control) for RS-485

    • Connector

       

      DB9 male for RS-232 interface
      5-pin terminal block for RS-422/485 interface
      Fiber ports for RS-232/422/485 interface

    • Isolation

       

      2 kV (I models)

    • Optical Fiber

       

    • Optical Fiber

       

    • Pull High/Low Resistor for RS-485

       

      150 kilo-ohm, 10 kilo-ohm, 4.7 kilo-ohm, 3.3 kilo-ohm, 1 kilo-ohm, 909 ohm, 822 ohm, 770 ohm, 500 ohm, 485 ohm

    • RS-485 Data Direction Control

       

      ADDC® (automatic data direction control)

    • Terminator for RS-485

       

      N/A, 120 ohms, 120 kilo-ohms

    • RS-232

       

      TxD, RxD, GND

    • RS-422

       

      Tx+, Tx-, Rx+, Rx-, GND

    • RS-485-4w

       

      Tx+, Tx-, Rx+, Rx-, GND

    • RS-485-2w

       

      Data+, Data-, GND

    • Input Current

       

      ICF-1150 Series: 264 mA @ 12 to 48 VDC
      ICF-1150I Series: 300 mA @ 12 to 48 VDC

    • Input Voltage

       

      12 to 48 VDC

      <

ICF-1150 Series

  • Brand: MOXA
  • Product Code: ICF-1150 Series
  • Availability: Please email - info@cayee.com.hk