• ICF-1170I Series

Industrial CAN-to-fiber converters

Features and Benefits

  •  Transmits data up to 2 km over optical fiber
  •  Converts CAN signals to fiber and fiber to CAN signals
  •  Baudrate up to 1 Mbps
  •  Dual power inputs for redundancy
  •  DIP switch for 120 ohm terminal resistance
  •  DIP switch for fiber test mode
  •  LEDs for Fiber Tx, Fiber Rx, Power 1, Power 2
  •  Wide-temperature model available for -40 to 85°C environments
  •  Fully compatible with the ISO 11898 standard

    Introduction

    The ICF-1170I Series CAN-to-fiber converters are used to convert CAN signals from copper to optical fiber. The converters come with 2 kV optical isolation for the CAN bus system and dual power inputs with alarm contact relay to ensure that your CAN bus system will remain online.

    • Optical Fiber

       

      100BaseFX ports (multi-mode ST connector)

    • Optical Fiber

       

    • Isolation

       

      2 kV (built-in)

    • No. of Ports

       

      1

    • Signals

       

      CAN_L, CAN_H, CAN Signal GND

    • Terminator

       

      N/A, 120 ohms (by DIP)

    • Input Current

       

      221 mA @ 12 to 48 VDC

    • Power Consumption

       

      221 mA @ 12 to 48 VDC

    • Input Voltage

       

      12 to 48 VDC

    • No. of Power Inputs

       

      2

    • Overload Current Protection

       

      Supported

    • Power Connector

       

      Terminal block (for DC models)

    • Housing

       

      Metal

    • IP Rating

       

      IP30

    • Dimensions

       

      30.3 x 70 x 115 mm (1.19 x 2.76 x 4.53 in)

    • Weight

       

      178 g (0.39 lb)

    • Installation

       

      DIN-rail mounting

    ICF-1170I Series

    • Brand: MOXA
    • Product Code: ICF-1170I Series
    • Availability: Please email - info@cayee.com.hk