• MGate 5114 Series

1-port Modbus RTU/ASCII/TCP/IEC 101-to-IEC 104 gateways

Features and Benefits

  •  Protocol conversion between Modbus RTU/ASCII/TCP, IEC 60870-5-101, and IEC 60870-5-104
  •  Supports IEC 60870-5-101 master/slave (balanced/unbalanced)
  •  Supports IEC 60870-5-104 client/server
  •  Supports Modbus RTU/ASCII/TCP master/client and slave/server
  •  Effortless configuration via web-based wizard
  •  Status monitoring and fault protection for easy maintenance
  •  Embedded traffic monitoring/diagnostic information for easy troubleshooting
  •  microSD card for configuration backup/duplication and event logs
  •  Built-in Ethernet cascading for easy wiring
  •  Redundant dual DC power inputs and relay output
  •  -40 to 75°C wide operating temperature models available
  •  Serial port with 2 kV isolation protection
  •  Security features based on IEC 62443

    Introduction

    The MGate 5114 is an industrial Ethernet gateway with 2 Ethernet ports and 1 RS-232/422/485 serial port for Modbus RTU/ASCII/TCP, IEC 60870-5-101, and IEC 60870-5-104 network communications. By integrating commonly used power protocols, the MGate 5114 provides the flexibility needed to fulfill the various conditions that arise with field devices that use different communications protocols to connect to a power SCADA system. To integrate Modbus or IEC 60870-5-101 devices onto an IEC 60870-5-104 network, use the MGate 5114 as a Modbus master/client or IEC 60870-5-101 master to collect data and exchange data with IEC 60870-5-104 systems.

    • 10/100BaseT(X) Ports (RJ45 connector)

       

      2
      Auto MDI/MDI-X connection

    • Magnetic Isolation Protection

       

      1.5 kV (built-in)

    • Industrial Protocols

       

      Modbus TCP Client (Master), Modbus TCP Server (Slave), IEC 60870-5-104 Client, IEC 60870-5-104 Server

    • Configuration Options

       

      Web Console (HTTP/HTTPS), Device Search Utility (DSU), Telnet Console

    • Management

       

      ARP, DHCP Client, DNS, HTTP, HTTPS, SMTP, SNMP Trap, SNMPv1/v2c/v3, TCP/IP, Telnet, SSH, UDP, NTP Client

    • MIB

       

      RFC1213, RFC1317

    • Time Management

       

      NTP Client

    • Console Port

       

      RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1)

    • No. of Ports

       

      1

    • Connector

       

      DB9 male

    • Serial Standards

       

      RS-232/422/485

    • Baudrate

       

      50 bps to 921.6 kbps

    • Data Bits

       

      7, 8

    • Parity

       

      Even, Mark, None, Odd, Space

    • Stop Bits

       

      1, 2

    • Flow Control

       

      RTS Toggle (RS-232 only), RTS/CTS

    • RS-485 Data Direction Control

       

      ADDC® (automatic data direction control)

    • Pull High/Low Resistor for RS-485

       

      1 kilo-ohm, 150 kilo-ohms

    • Terminator for RS-485

       

      120 ohms

    • Isolation

       

      2 kV (built-in)

    • RS-232

       

      TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

    • RS-422

       

      Tx+, Tx-, Rx+, Rx-, GND

    • RS-485-2w

       

      Data+, Data-, GND

    • RS-485-4w

       

      Tx+, Tx-, Rx+, Rx-, GND

    • Industrial Protocols

       

      Modbus RTU/ASCII Master, Modbus RTU/ASCII Slave, IEC 60870-5-101 Master (Balanced/Unbalanced), IEC 60870-5-101 Slave (Balanced/Unbalanced)

    • Configuration Options

       

      Serial Console

    • Mode

       

      Master, Slave

MGate 5114 Series

  • Brand: MOXA
  • Product Code: MGate 5114 Series
  • Availability: Please email - info@cayee.com.hk