• VPort 461A Series

Superior video performance, 1-channel H.264/MJPEG industrial video encoders

Features and Benefits

  •  Supports up to 4 video streams simultaneously for H.264 and MJPEG
  •  Up to Full D1 resolution (720 x 480) @ 90 fps for 3 video streams with legacy analog video images
  •  Video latency under 200 ms
  •  2 Ethernet ports for cascading or Ethernet port redundancy
  •  DynaStream™ for optimized network efficiency
  •  ONVIF support for standardization and interoperability
  •  Local storage capability with SD card slot
  •  Industrial design with -40 to 75°C operating temperature range

    Introduction

    The VPort 461A 1-channel industrial video encoder has a H.264 video compression algorithm that helps provide the best video quality on the market, but with a smaller bandwidth requirement than other video compression standards. In addition, to meet various video stream requirements, the VPort 461A can provide up to 4 video streams simultaneously using H.264 and MJPEG compression formats. Video streams can be used for different purposes, such as viewing, recording, and analysis. In addition, the rugged industrial design, which includes a -40 to 75°C operating temperature and industrial certifications, makes the VPort 461A suitable for harsh environments.

    The VPort 461A is equipped with Moxa’s innovative DynaStream™ technology, which allows users to change the video frame rate automatically. With DynaStream™, users can control their network bandwidth budget and simplify network system management. The CBR Pro™ function helps to guarantee the lowest packet loss under limited bandwidth transmissions to ensure that images will not exhibit the mosaic effect.

    • SD Slot

       

      SDXC

    • Digital Input Channels

       

      2

    • Digital Inputs

       

      +13 to +30 V for state 1
      -30 to +1 V for state 0
      Max. input current: 8 mA

    • Relay Channels

       

      2

    • Contact Current Rating

       

      Resistive load: 1 A @ 24 VDC

    • Connector

       

      Terminal block

    • 10/100BaseT(X) Ports (RJ45 connector)

       

      2

    • Protocols

       

      TCP/IP, IPv4/IPv6, UDP, HTTP, RTP/RTSP, ARP, UPnP, FTP, TFTP, SMTP, NTP Client, DNS, DDNS, QoS, IGMP v3, ICMP, SNMPv1/v2c/v3, Modbus TCP, HTTPS, 802.1X, NTCIP

    • Password

       

      User-level password protection

    • Filter

       

      IP address

    • Authentication

       

      802.1X

    • Encryption

       

      HTTPS

    • LED Indicators

       

      STAT: Indicates if system is booted up properly or not
      Power 1: Power 1 on/off
      Power 2: Power 2 on/off
      FAULT: Can be configured to correspond to system alarm, power failure, or disconnected network
      Video: Video input signal
      PTZ: Indicates if PTZ or COM port data has been transmitted
      SD: Indicates if SD card was mounted successfully
      Network: 10 Mbps or 100 Mbps

    • PTZ Port

       

      1, RS-232 or RS-422/485 port, terminal block connector, 115.2 kbps

    • COM Port

       

      1, RS-232 or RS-485 port, DB9 male connector, 115.2 kbps

    • Console Port

       

      1 RS-232 port, 10-pin RJ45 (115200, n, 8, 1)

    • No. of Power Inputs

       

      2

    • Input Voltage

       

      Redundant dual inputs

    • Operating Voltage

       

      12 to 32 VDC, 18 to 30 VAC

    • Input Current

       

      0.85 A @ 12 VDC, 0.3 A @ 32 VDC
      0.56/0.85 A @ 30/18 VAC

    • Power Connector

       

      2-pin terminal block

    • Video Compression

       

      H.264 (ISO/IEC 14496-10) or MJPEG

    • Video Input

       

      1, BNC connector (1.0 Vpp, 75 ohm)

    • Video Output

       

      via Ethernet

    • Video Streams

       

      4 independent H.264 or MJPEG video streams

    • NTSC/PAL

       

VPort 461A Series

  • Brand: MOXA
  • Product Code: VPort 461A Series
  • Availability: Please email - info@cayee.com.hk