• PT-G7828 Series

IEC 61850-3 28-port Layer 3 full Gigabit modular managed Ethernet switches

Features and Benefits

  •  IEC 61850-3 Edition 2 Class 2 compliant
  •  Hot-swappable interface and power modules for continuous operation
  •  Built-in MMS server based on IEC 61850-90-4 switch data modeling for power SCADA
  •  IEEE 1588 hardware time stamp supported

    Introduction

    The PT-G7828 modular switches provide up to 28 Gigabit ports, including 4 fixed ports, 6 interface module slots, and 2 power module slots to ensure sufficient flexibility for a variety of applications. The PT-G7828 Series is designed to meet evolving network requirements, including a hot-swappable module design that enables you to change or add devices without shutting down your device.

    The multiple Ethernet modules (RJ45, SFP, and PoE) and power units (24/48 VDC, 110/220 VAC/VDC) provide even greater flexibility as well as suitability for different operating conditions. The switches support a full Gigabit platform that provides enough bandwidth to set up an Ethernet backbone. Certifications include IEC 61850 Edition 2 Class 2 to ensure high availability and wide usage.

    • 10/100/1000BaseT(X) Ports (RJ45 connector)

       

      2

    • 100/1000BaseSFP Ports

       

      2

    • Module

       

      6

    • Slot Combination

       

      See the LM-7000H datasheet for Gigabit Ethernet module and PoE+ module information

    • Standards

       

      IEEE 802.3 for 10BaseT
      IEEE 802.3u for 100BaseT(X) and 100BaseFX
      IEEE 802.3ab for 1000BaseT(X)
      IEEE 802.3z for 1000BaseX
      IEEE 802.1D-2004 for Spanning Tree Protocol
      IEEE 802.1w for Rapid Spanning Tree Protocol
      IEEE 802.1p for Class of Service
      IEEE 802.1Q for VLAN Tagging
      IEEE 802.1X for authentication
      IEEE 802.3ad for Port Trunk with LACP
      IEEE 802.3x for flow control

    • Management

       

      IPv4/IPv6, SNMP Inform, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 66/67/82, BOOTP, TFTP, LLDP, RARP, HTTP, HTTPS, Telnet, Flow control, Back Pressure Flow Control, Port Mirror, Fiber check, Dying Gasp, SMTP, Syslog

    • MIB

       

      MIB-II, Ethernet-like MIB, Bridge MIB, P-BRIDGE MIB, Q-BRIDGE MIB, RSTP MIB, RMON MIB Groups 1, 2, 3, 9

    • Filter

       

      802.1Q, GMRP, GVRP, IGMP v1/v2/v3, QinQ VLAN

    • Redundancy Protocols

       

      Link Aggregation, MSTP, RSTP, STP, Turbo Chain, Turbo Ring v1/v2, V-ON

    • Security

       

      RADIUS, TACACS+, SSH, Port Lock, Broadcast storm protection, MAB authentication, Sticky MAC, Access control list

    • Time Management

       

      NTP Server/Client, SNTP, IEEE 1588v2 PTP (hardware-based)

    • Power Substation

       

      IEC 61850 QoS, GOOSE Check

    • Industrial Protocols

       

      EtherNet/IP, Modbus TCP

    • Unicast Routing

       

      Static Route, RIPV1/V2, OSPF

    • Multicast Routing

       

      DVMRP, PIM-DM

    • Routing Redundancy

       

      VRRP

    • Priority Queues

       

      8

    • Max. No. of VLANs

       

      512

    • VLAN ID Range

       

      VID 1 to 4094

    • IGMP Groups

       

      4096

    • MAC Table Size

       

      16 K

    • Packet Buffer Size

       

      12 Mbits

    • Jumbo Frame Size

       

      9.6 KB

    • Console Port

       

      Micro USB Type B

    • Storage Port

       

      USB Type A

    • Input Voltage

       

      with PWR-HV-P48 installed:
      110/220 VDC/VAC for the switch system
      48 VDC for PoE system (53 to 57 VDC is recommended for PoE+ devices)

      with PWR-LV-P48 installed:
      24/48 VDC for the switch system
      48 VDC for PoE system (53 to 57 VDC is recommended for PoE+ devices)

      with PWR-HV-NP installed:
      110/220 VDC/VAC for the switch system

      with PWR-LV-NP installed:
      24/48 VDC for the switch system

    • Operating Voltage

       

      with PWR-HV-P48 installed:
      88 to 300 VDC, 90 to 264 VAC for the switch system
      46 to 57 VDC for PoE systems

      with PWR-LV-P48 installed:
      18 to 72 VDC for the switch system
      46 to 57 VDC for PoE systems

      with PWR-HV-NP installed:
      88 to 300 VDC, 90 to 264 VAC for the switch system

      with PWR-LV-NP installed:
      18 to 72 VDC for the switch system

    • Input Current

       

      with PWR-HV-P48 installed:
      PWR input current (switch system)
      Max. 0.11 A @ 110 VDC
      Max. 0.06 A @ 220 VDC
      Max. 0.29 A @ 110 VAC
      Max. 0.18 A @ 220 VAC
      EPS input current (PoE system)
      Max. 0.53 A @ 48 VDC
      (excluding power consumption of PoE devices)

      with PWR-LV-P48 installed:
      PWR input current (switch system)
      Max. 0.53 A @ 24 VDC
      Max. 0.28 A @ 48 VDC
      EPS input current (PoE system)
      Max. 0.53 A @ 48 VDC
      (excluding power consumption of PoE devices)

      with PWR-HV-NP installed:
      PWR input current (switch system)
      Max. 0.11 A @ 110 VDC
      Max. 0.06 A @ 220 VDC
      Max. 0.29 A @ 110 VAC
      Max. 0.18 A @ 220 VAC

      with PWR-LV-NP installed:
      PWR input current (switch system)
      Max. 0.53 A @ 24 VDC
      Max. 0.28 A @ 48 VDC

    • IP Rating

       

      IP30

    • Dimensions

       

      443 x 44 x 280 mm (17.44 x 1.73 x 11.02 in)

PT-G7828 Series

  • Brand: MOXA
  • Product Code: PT-G7828 Series
  • Availability: Please email sales@cayee.com.hk