• MGate 5103 Series

1-port Modbus RTU/ASCII/TCP/EtherNet/IP-to-PROFINET gateways

Features and Benefits

  •  Converts Modbus, or EtherNet/IP to PROFINET
  •  Supports PROFINET IO device
  •  Supports Modbus RTU/ASCII/TCP master/client and slave/server
  •  Supports EtherNet/IP Adapter
  •  Effortless configuration via web-based wizard
  •  Built-in Ethernet cascading for easy wiring
  •  Embedded traffic monitoring/diagnostic information for easy troubleshooting
  •  microSD card for configuration backup/duplication and event logs
  •  Status monitoring and fault protection for easy maintenance
  •  Serial port with 2 kV isolation protection
  •  -40 to 75°C wide operating temperature models available
  •  Supports redundant dual DC power inputs and 1 relay output
  •  Security features based on IEC 62443

    Introduction

    The MGate 5103 is an industrial Ethernet gateway for converting Modbus RTU/ASCII/TCP or EtherNet/IP to PROFINET-based network communications. To integrate existing Modbus devices onto a PROFINET network, use the MGate 5103 as a Modbus master/slave or EtherNet/IP adapter to collect data and exchange data with PROFINET devices. The latest exchange data will be stored in the gateway. The gateway will convert stored Modbus or EtherNet/IP data into PROFINET packets so the PROFINET IO Controller can control or monitor field devices.

    • 10/100BaseT(X) Ports (RJ45 connector)

       

      2
      Auto MDI/MDI-X connection

    • Magnetic Isolation Protection

       

      1.5 kV (built-in)

    • Industrial Protocols

       

      PROFINET IO Device, Modbus TCP Client (Master), Modbus TCP Server (Slave), EtherNet/IP Adapter

    • Configuration Options

       

      Web Console (HTTP/HTTPS), Device Search Utility (DSU), Telnet Console

    • Management

       

      ARP, DHCP Client, DNS, HTTP, HTTPS, SMTP, SNMP Trap, SNMPv1/v2c/v3, TCP/IP, Telnet, SSH, UDP, NTP Client

    • MIB

       

      RFC1213, RFC1317

    • Time Management

       

      NTP Client

    • Console Port

       

      RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1)

    • No. of Ports

       

      1

    • Connector

       

      DB9 male

    • Serial Standards

       

      RS-232/422/485

    • Baudrate

       

      50 bps to 921.6 kbps

    • Data Bits

       

      7, 8

    • Parity

       

      None, Even, Odd, Space, Mark

    • Stop Bits

       

      1, 2

    • Flow Control

       

      RTS Toggle (RS-232 only), RTS/CTS

    • RS-485 Data Direction Control

       

      ADDC® (automatic data direction control)

    • Pull High/Low Resistor for RS-485

       

      1 kilo-ohm, 150 kilo-ohms

    • Terminator for RS-485

       

      120 ohms

    • Isolation

       

      2 kV (built-in)

    • RS-232

       

      TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

    • RS-422

       

      Tx+, Tx-, Rx+, Rx-, GND

    • RS-485-2w

       

      Data+, Data-, GND

    • RS-485-4w

       

      Tx+, Tx-, Rx+, Rx-, GND

    • Configuration Options

       

      Serial Console

    • Industrial Protocols

       

      Modbus RTU/ASCII Master, Modbus RTU/ASCII Slave

    • Mode

       

      Master, Slave

MGate 5103 Series

  • Brand: MOXA
  • Product Code: MGate 5103 Series
  • Availability: Please email - info@cayee.com.hk