• ioLogik E2200 Series

Smart Ethernet remote I/O with Click&Go Logic

Features and Benefits

  •  Front-end intelligence with patented Click&Go control logic, up to 24 rules
  •  Active communication with MX-AOPC UA Server
  •  Saves time and wiring costs with peer-to-peer communications
  •  Supports SNMP v1/v2c/v3
  •  Friendly configuration via web browser
  •  Simplifies I/O management with MXIO library for Windows or Linux
  •  Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments

    Introduction

    Moxa’s ioLogik E2200 Series Ethernet Remote I/O is a PC-based data acquisition and control device that uses proactive, event-based reporting to control I/O devices and features the Click&Go programming interface. Unlike traditional PLCs, which are passive and must poll for data, Moxa’s ioLogik E2200 Series will, when paired with our MX-AOPC UA Server, communicate with SCADA systems using active messaging that is pushed to the server only when state changes or configured events occur. Additionally, the ioLogik E2200 features SNMP for communications and control using an NMS (Network Management System), allowing IT professionals to configure the device to push I/O status reports according to configured specifications. This report-by-exception approach, which is new to PC-based monitoring, requires far less bandwidth than traditional polling methods.

    • Language

       

      Click&Go

    • Analog Input Channels

       

      ioLogik E2240 Series: 8
      ioLogik E2242 Series: 4

    • Analog Output Channels

       

      ioLogik E2240 Series: 2

    • Configurable DIO Channels (by software)

       

      ioLogik E2212 Series: 4
      ioLogik E2242 Series: 12

    • Digital Input Channels

       

      ioLogik E2210 Series: 12
      ioLogik E2212 Series: 8
      ioLogik E2214 Series: 6

    • Digital Output Channels

       

      ioLogik E2210/E2212 Series: 8
      ioLogik E2260/E2262 Series: 4

    • Relay Channels

       

      ioLogik E2214 Series: 6

    • RTD Channels

       

      ioLogik E2260 Series: 6

    • Thermocouple Channels

       

      ioLogik E2262 Series: 8

    • Buttons

       

      Reset button

    • Isolation

       

      3k VDC or 2k Vrms

    • Rotary Switch

       

      0 to 9

    • Connector

       

      Screw-fastened Euroblock terminal

    • Counter Frequency

       

      900 Hz

    • Digital Filtering Time Interval

       

      Software configurable

    • Dry Contact

       

      On: short to GND
      Off: open

    • I/O Mode

       

      DI or event counter

    • Points per COM

       

      ioLogik E2210 Series: 12 channels
      ioLogik E2212/E2242 Series: 6 channels
      ioLogik E2214 Series: 3 channels

    • Sensor Type

       

      ioLogik E2210 Series: Dry Contact and Wet Contact (NPN)
      ioLogik E2212/E2214/E2242 Series: Dry Contact and Wet Contact (NPN or PNP)

    • Wet Contact (DI to GND)

       

      On: 0 to 3 VDC
      Off: 10 to 30 VDC

    • Connector

       

      Screw-fastened Euroblock terminal

    • Current Rating

       

      200 mA per channel

    • I/O Mode

       

      DO or pulse output

    • I/O Type

       

      Sink

    • Over-Current Protection

       

      0.65 A per channel @ 25°C

    • Over-Temperature Shutdown

       

      175°C (min.)

    • Over-Voltage Protection

       

      45 VDC (typical)

    • Pulse Output Frequency

       

      1 kHz

    • DIO Output Leakage Current

       

      4.0 mA @ 24 VDC

    • Connector

       

      Screw-fastened Euroblock terminal

    • Contact Current Rating

       

      Inductive load: 2 A @ 30 VDC, 250 VAC, 110 VAC
      Resistive load: 5 A @ 30 VDC, 250 VAC, 110 VAC

    • Contact Resistance

       

      100 milli-ohms (max.)

    • Electrical Endurance

       

ioLogik E2200 Series

  • Brand: MOXA
  • Product Code: ioLogik E2200 Series
  • Availability: Please email - info@cayee.com.hk